The pressure makes it possible to remove all kinds of dirt from surfaces. One of the primary reasons pressure washers are efficient is that they shoot out water at extremely high pressure. There are other issues independent of things like clogs in the nozzle or damage. Read Also: Top 10 Best Pressure Washer Soap What are Other Common Turbo Nozzle Problems?Ī lack of spin isn’t the only thing that would make a high-pressure turbo nozzle not work. If it is old and worn out, it will be best to replace it. If you’ve used one turbo nozzle for a long time and notice it isn’t spinning, check it to ensure it isn’t any of the above issues. Sometimes it could be because you have owned the pressure washer for long and the turbo nozzle has worn down. It isn’t all the time when a nozzle stops spinning that it’s your fault. There is no fix for such damage hence the reason you will need to get another turbo nozzle. In case the turbo nozzle stops working from this issue, you will have to get a replacement. The nozzle would therefore stop spinning, and you would be left with a problem on your hands. Sometimes small actions like a child stepping on the turbo nozzle would also damage it. If you have a ceramic turbo nozzle, it would be best to avoid dropping it. That’s, however, not common with all the turbo nozzles since plastic nozzles would be more resistant to such damage. The force would make the internal parts of the nozzle sustain damage. The most common reason for the damage is if the nozzle falls or you accidentally drop it. If that’s happening, then it means there is some damage inside.ĭamage inside the nozzle will make it stop spinning and impede your cleaning. There are times you might do everything right but still end up with a turbo nozzle that just won’t turn. Internal DamageĬlogging isn’t the only reason a turbo nozzle would stop spinning. Any obstacle will make the nozzle stop spinning and interfere with your cleaning. You need to ensure you frequently clean your turbo nozzle to prevent obstacles from gathering inside. While at it, you should also check the other nozzles for clogging and clean them. Repeat the entire process to ensure you remove all the dirt that might cause problems. If dirt is the problem, you will see it flushed out with water. Use the wire and gently poke inside the turbo nozzle in a repeated motion. Take apart the spray wand to get access to the nozzles. Unclogging a Turbo NozzleĪll you will need to unclog a turbo nozzle is a wire and water. Here is how to clear a turbo nozzle of dirt and other debris. Both the regular and turbo nozzles get dirty after periods of use, even if you clean with clean water. To have it spinning again, you’ll have to unclog it. So how do you fix that and have your nozzle spinning again? Therefore, any obstacle in the water will make the turbo nozzle stop spinning. The turbo nozzle is the preferred nozzle for heavy cleaning, so it is normal for it to get clogged time after time. The likeliest reason a pressure washer nozzle isn’t working is because of clogging or dirt that might be inside it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |